Leiti 6 vastet.

ID Kanal Video Kustutatud Kuupäev Kirjeldus Subtiitrid Avalik Ülekanne HD URL PRIVATE TitleMUI_en TitleMUI_et KirjeldusMUI_en KirjeldusMUI_et Filename Category CategoryMUI_en Tags OdyseeURL KanalMUI_en KanalMUI_et Translated has_thumbnail local_stream ytdlp_meta est_subs eng_subs
893 Press any key to continue... Optics B - Creepy Audio Glitch [Flipnic, PS2] 0 2025-04-30 A really weird audio glitch that I happened to stumble upon when attempting to record an Any% speedrun of Flipnic. These audio glitches can occur when Flipnic fails to load the MIDI sequence data correctly, so it just tries to play unrelated garbage data as music (at least that's what I think is happening here).

I didn't finish the run due to the fact the battery on my headphones ran out, but you can see the rest of the unfinished run here: https://www.youtube.com/watch?v=0Ra7-yHxhpQ		 0 1 0 1 https://www.youtube.com/watch?v=LR7fw-G4zs4 0 Optics B - Creepy Audio Glitch [Flipnic, PS2] Optics B - Creepy Audio Glitch [Flipnic, PS2] A really weird audio glitch that I happened to stumble upon when attempting to record an Any% speedrun of Flipnic. These audio glitches can occur when Flipnic fails to load the MIDI sequence data correctly, so it just tries to play unrelated garbage data as music (at least that's what I think is happening here).

I didn't finish the run due to the fact the battery on my headphones ran out, but you can see the rest of the unfinished run here: https://www.youtube.com/watch?v=0Ra7-yHxhpQ		 A really weird audio glitch that I happened to stumble upon when attempting to record an Any% speedrun of Flipnic. These audio glitches can occur when Flipnic fails to load the MIDI sequence data correctly, so it just tries to play unrelated garbage data as music (at least that's what I think is happening here).

I didn't finish the run due to the fact the battery on my headphones ran out, but you can see the rest of the unfinished run here: https://www.youtube.com/watch?v=0Ra7-yHxhpQ		 flipnic_ufo_invasion.mp4 Videomängude analüüs Video game analysis N/A Press any key to continue... Press any key to continue... 1 /channel_db_lite/web/thumbs/893.jpg N/A N/A N/A N/A
891 Press any key to continue... Bad Apple, but it's in Flipnic (FMV replacement attempt) [PS2 Romhack] 0 2025-04-26 Through a very involved process, I was able to successfully play a custom video clip in Flipnic. The audio is stuttery for reasons I don't really understand yet, but I was able to have the game play back a custom video with alpha mask.

Steps that I took to replace the FMV:
1. Create an AVI video file with 256x512 resolution where the first half is RGB data and the second half is alpha mask.
2. Separate audio/video
3. Convert video to m2v with this ffmpeg command (currently only tested with low-res FMVs):
ffmpeg -i badapplefmv.avi -c:v mpeg2video -profile:v main -level:v 8 -b:v 4.531M -maxrate 5M -minrate 4.531M -bufsize 1835k -pix_fmt yuv420p -g 1 -bf 0 -flags +ildct+ilme -top 1 -r 50 -s 256x512 badapplefmv.m2v
4. Convert audio to WAV with these settings:
- PCM
- Signed 16-bit little endian
- 44.1 kHz
5. Convert WAV file to INT in MFAudio with these settings:
- [File format] RAW - Raw Sound Data - Compressed ADPCM
- Frequency: 44100Hz
- Interleave: 400 Bytes
- Samples: 16 bits
- Channels: 2 (Stereo)
6. Convert m2v video to .ipu using ps2str.exe
- IPU Convert (tab)
- Add your .m2v file
- Choose "MPEG Video Elementary Stream"
- Choose where the output file should be
- Press "Start"
- It may say bad video file, but in the end you should have an .ipu file regardless (just make sure it's bigger than a few kilobytes)
7. Patch the .ipu file using a hex editor
- Change first 4 bytes to 69 70 75 6D
- For hi-res FMVs: set bytes 8 to B as "00 02 C0 01" (width and height btw)
- For low-res FMVs: set bytes 8 to B as "00 01 00 02"
- At offset 0x0C, it should have 32-bit int corresponding to the number of frames in little endian byte order
- At offset 0x04, it should have the size of the file (including this patched header)
- At the end of the file, insert 8 bytes with the following values: "00 00 01 B0 00 00 01 B1"
8. Mux IPU and INT files
- Currently this relies on using an existing .PSS file (I used STAFF_ROLL1.PSS for this video)
- Replace the contents of the audio and video streams with the contents of INT and IPU files respectively. There is currently no other way to do this other than coding (I might release a tool that could do the patching and muxing for you).
9. Repack STR.BIN with the modified video file
- You can use FlipnicFS or FlipnicBinExtractor to do this
- You may want to replace an existing .PSS file
10. Replace STR.BIN in the ISO file
- I used Apache1.1 in this demonstration (ISO tools - Update selected file)
- You should backup the original ISO file first
11. Load the modified file in an emulator or OpenPS2Loader if you want to use original hardware		 0 1 0 1 https://www.youtube.com/watch?v=FBDma-tPlJw 0 Bad Apple, but it's in Flipnic (FMV replacement attempt) [PS2 Romhack] Bad Apple, but it's in Flipnic (FMV replacement attempt) [PS2 Romhack] Through a very involved process, I was able to successfully play a custom video clip in Flipnic. The audio is stuttery for reasons I don't really understand yet, but I was able to have the game play back a custom video with alpha mask.

Steps that I took to replace the FMV:
1. Create an AVI video file with 256x512 resolution where the first half is RGB data and the second half is alpha mask.
2. Separate audio/video
3. Convert video to m2v with this ffmpeg command (currently only tested with low-res FMVs):
ffmpeg -i badapplefmv.avi -c:v mpeg2video -profile:v main -level:v 8 -b:v 4.531M -maxrate 5M -minrate 4.531M -bufsize 1835k -pix_fmt yuv420p -g 1 -bf 0 -flags +ildct+ilme -top 1 -r 50 -s 256x512 badapplefmv.m2v
4. Convert audio to WAV with these settings:
- PCM
- Signed 16-bit little endian
- 44.1 kHz
5. Convert WAV file to INT in MFAudio with these settings:
- [File format] RAW - Raw Sound Data - Compressed ADPCM
- Frequency: 44100Hz
- Interleave: 400 Bytes
- Samples: 16 bits
- Channels: 2 (Stereo)
6. Convert m2v video to .ipu using ps2str.exe
- IPU Convert (tab)
- Add your .m2v file
- Choose "MPEG Video Elementary Stream"
- Choose where the output file should be
- Press "Start"
- It may say bad video file, but in the end you should have an .ipu file regardless (just make sure it's bigger than a few kilobytes)
7. Patch the .ipu file using a hex editor
- Change first 4 bytes to 69 70 75 6D
- For hi-res FMVs: set bytes 8 to B as "00 02 C0 01" (width and height btw)
- For low-res FMVs: set bytes 8 to B as "00 01 00 02"
- At offset 0x0C, it should have 32-bit int corresponding to the number of frames in little endian byte order
- At offset 0x04, it should have the size of the file (including this patched header)
- At the end of the file, insert 8 bytes with the following values: "00 00 01 B0 00 00 01 B1"
8. Mux IPU and INT files
- Currently this relies on using an existing .PSS file (I used STAFF_ROLL1.PSS for this video)
- Replace the contents of the audio and video streams with the contents of INT and IPU files respectively. There is currently no other way to do this other than coding (I might release a tool that could do the patching and muxing for you).
9. Repack STR.BIN with the modified video file
- You can use FlipnicFS or FlipnicBinExtractor to do this
- You may want to replace an existing .PSS file
10. Replace STR.BIN in the ISO file
- I used Apache1.1 in this demonstration (ISO tools - Update selected file)
- You should backup the original ISO file first
11. Load the modified file in an emulator or OpenPS2Loader if you want to use original hardware		 Through a very involved process, I was able to successfully play a custom video clip in Flipnic. The audio is stuttery for reasons I don't really understand yet, but I was able to have the game play back a custom video with alpha mask.

Steps that I took to replace the FMV:
1. Create an AVI video file with 256x512 resolution where the first half is RGB data and the second half is alpha mask.
2. Separate audio/video
3. Convert video to m2v with this ffmpeg command (currently only tested with low-res FMVs):
ffmpeg -i badapplefmv.avi -c:v mpeg2video -profile:v main -level:v 8 -b:v 4.531M -maxrate 5M -minrate 4.531M -bufsize 1835k -pix_fmt yuv420p -g 1 -bf 0 -flags +ildct+ilme -top 1 -r 50 -s 256x512 badapplefmv.m2v
4. Convert audio to WAV with these settings:
- PCM
- Signed 16-bit little endian
- 44.1 kHz
5. Convert WAV file to INT in MFAudio with these settings:
- [File format] RAW - Raw Sound Data - Compressed ADPCM
- Frequency: 44100Hz
- Interleave: 400 Bytes
- Samples: 16 bits
- Channels: 2 (Stereo)
6. Convert m2v video to .ipu using ps2str.exe
- IPU Convert (tab)
- Add your .m2v file
- Choose "MPEG Video Elementary Stream"
- Choose where the output file should be
- Press "Start"
- It may say bad video file, but in the end you should have an .ipu file regardless (just make sure it's bigger than a few kilobytes)
7. Patch the .ipu file using a hex editor
- Change first 4 bytes to 69 70 75 6D
- For hi-res FMVs: set bytes 8 to B as "00 02 C0 01" (width and height btw)
- For low-res FMVs: set bytes 8 to B as "00 01 00 02"
- At offset 0x0C, it should have 32-bit int corresponding to the number of frames in little endian byte order
- At offset 0x04, it should have the size of the file (including this patched header)
- At the end of the file, insert 8 bytes with the following values: "00 00 01 B0 00 00 01 B1"
8. Mux IPU and INT files
- Currently this relies on using an existing .PSS file (I used STAFF_ROLL1.PSS for this video)
- Replace the contents of the audio and video streams with the contents of INT and IPU files respectively. There is currently no other way to do this other than coding (I might release a tool that could do the patching and muxing for you).
9. Repack STR.BIN with the modified video file
- You can use FlipnicFS or FlipnicBinExtractor to do this
- You may want to replace an existing .PSS file
10. Replace STR.BIN in the ISO file
- I used Apache1.1 in this demonstration (ISO tools - Update selected file)
- You should backup the original ISO file first
11. Load the modified file in an emulator or OpenPS2Loader if you want to use original hardware		 2025-04-26 16-12-25.mkv Videomängude analüüs Video game analysis N/A Press any key to continue... Press any key to continue... 1 /channel_db_lite/web/thumbs/891.jpg N/A N/A N/A N/A
561 Press any key to continue... Flipnic, but it's REALLY LOUD 0 2024-01-20 Did you know that in Flipnic (PS2), the volume levels are stored as a 16-bit signed integer? And that the maximum value the game uses is actually 127?
In this video, we'll find out what happens if you increase the volume from 127 to 32767!

Note that the specific memory address for changing the volume may be different accross various regional versions of the game.

Emulator: PCSX2 (Nightly)

Timestamps:
0:00 Increasing the volume
0:23 Biology
11:08 Evolution
12:30 Metallurgy
19:16 Optics
26:17 Biology 2P
27:23 Geometry
42:18 Geometry 2P		 0 1 0 1 https://www.youtube.com/watch?v=w4VzUiEuH10 0 Flipnic, but it's REALLY LOUD Flipnic, but it's REALLY LOUD Did you know that in Flipnic (PS2), the volume levels are stored as a 16-bit signed integer? And that the maximum value the game uses is actually 127?
In this video, we'll find out what happens if you increase the volume from 127 to 32767!

Note that the specific memory address for changing the volume may be different accross various regional versions of the game.

Emulator: PCSX2 (Nightly)

Timestamps:
0:00 Increasing the volume
0:23 Biology
11:08 Evolution
12:30 Metallurgy
19:16 Optics
26:17 Biology 2P
27:23 Geometry
42:18 Geometry 2P		 Did you know that in Flipnic (PS2), the volume levels are stored as a 16-bit signed integer? And that the maximum value the game uses is actually 127?
In this video, we'll find out what happens if you increase the volume from 127 to 32767!

Note that the specific memory address for changing the volume may be different accross various regional versions of the game.

Emulator: PCSX2 (Nightly)

Timestamps:
0:00 Increasing the volume
0:23 Biology
11:08 Evolution
12:30 Metallurgy
19:16 Optics
26:17 Biology 2P
27:23 Geometry
42:18 Geometry 2P		 FlipnicButLoudMinified.mp4 Videomängude analüüs Video game analysis N/A Press any key to continue... Press any key to continue... 1 /channel_db_lite/web/thumbs/561.jpg N/A /channel_db_lite/web/json/561.json N/A N/A
323 Press any key to continue... Bad luck (Part 3/3) 0 2019-12-07 In these videos, I'm playing a PS2 game called Flipnic (PAL version). An interesting thing that happens when you start the game is that a monkey starts fishing. The fish it gets relates to your supposed "luck" in the game. Well, as the title suggests, I happened to get bad luck, so lets see how this may affect the gameplay. This video continues the three part series. 0 1 0 0 https://www.youtube.com/watch?v=Kyg7At8P-u0 0 . . In these videos, I'm playing a PS2 game called Flipnic (PAL version). An interesting thing that happens when you start the game is that a monkey starts fishing. The fish it gets relates to your supposed "luck" in the game. Well, as the title suggests, I happened to get bad luck, so lets see how this may affect the gameplay.
This video continues the three part series.


This series consists of three parts:

1. Trying luck on completing yellow missions

2. Continuing multiball mode and losing a lot of balls

3. Red missions and the ending


So, wish me luck, or lack thereof...


Recorded footage from PCSX2		 . seeyouagain.wmv Videomängude analüüs Video game analysis https://odysee.com/@Press_any_key_to_continue:2/BadLuckFlipnic:d Press any key to continue... Press any key to continue... 1 /channel_db_lite/web/thumbs/323.jpg N/A /channel_db_lite/web/json/323.json N/A N/A
322 Press any key to continue... Bad luck (Part 2/3) 0 2019-12-05 In these videos, I'm playing a PS2 game called Flipnic (PAL version). An interesting thing that happens when you start the game is that a monkey starts fishing. The fish it gets relates to your supposed "luck" in the game. Well, as the title suggests, I happened to get bad luck, so lets see how this may affect the gameplay. This video continues the three part series. 0 1 0 0 https://www.youtube.com/watch?v=Lj030XglNt4 0 . . . . solitaire.wmv Videomängude analüüs Video game analysis https://odysee.com/@Press_any_key_to_continue:2/BadLuckFlipnic:d Press any key to continue... Press any key to continue... 1 /channel_db_lite/web/thumbs/322.jpg N/A /channel_db_lite/web/json/322.json N/A N/A
321 Press any key to continue... Bad luck (Part 1/3) 0 2019-12-04 In this video, I'm playing a PS2 game called Flipnic (PAL version). An interesting thing that happens when you start the game is that a monkey starts fishing. The fish it gets relates to your supposed "luck" in the game. Well, as the title suggests, I happened to get bad luck, so lets see how this may affect the gameplay. 0 1 0 0 https://www.youtube.com/watch?v=RkvO_JXbZuo 0 . . In this video, I'm playing a PS2 game called Flipnic (PAL version). An interesting thing that happens when you start the game is that a monkey starts fishing. The fish it gets relates to your supposed "luck" in the game. Well, as the title suggests, I happened to get bad luck, so lets see how this may affect the gameplay.

This series consists of three parts:
1. Trying luck on completing yellow missions
2. Continuing multiball mode and losing a lot of balls
3. Red missions and the ending

So, wish me luck, or lack thereof...

Recorded footage from PCSX2		 . flipnic_exposed.wmv Videomängude analüüs Video game analysis https://odysee.com/@Press_any_key_to_continue:2/BadLuckFlipnic:d Press any key to continue... Press any key to continue... 1 /channel_db_lite/web/thumbs/321.jpg N/A /channel_db_lite/web/json/321.json N/A N/A